Telit Wireless Solutions LN940A11 SERIES - AT+ESA Store Preferred Message

80591ST10886A Rev.2 Page 157 of 200 2018-07-02
OK
Read Command AT+ES? +ES:<orig_rqst>,<orig_fbk>,<ans_fb
k>
OK
Write Command AT+ES=<orig_rqst>,<orig
_fbk>,<ans_fbk>
OK
Parameter Description
parameter
Value
Instruction
<orig_rqst> 6
<orig_fbk> Undefined
<ans_fbk> 8
14.2. AT+ESA Store Preferred Message
AT+ES command is used to store preferred message. Support in 3GPP.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+ESA=? AT+ESA=?
+ESA: (0),,,,(0),(0),(0-255),
OK
Read Command AT+ESA? +ESA: <trans_idle>,
<framed_idle>,
<framed_un_ov>,
<hd_auto>,<crc_type>,
<nrzi_en>, <sync1>,
<sync2>
OK
Write Command AT+ESA=<trans_idle>,
<framed_idle>,
<framed_un_ov>,
OK