Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 19 of 200 2018-07-02
4.2. ATS4 Response Formatting
ATS4 determines the character generated by the device for result code and information text, along with the
command line termination character set via ATS3.
Syntax
Type
Command
Possible Return Result
Instruction
Read Command ATS4? <n>
OK
-
Write Command
ATS4=<n> OK -
Parameter Description
parameter
Value
Instruction
<n> 0~127 Default value is 10 (Corresponding ASCII character LF
carriage return )
Response formatting character. It is not recommended
to change this value.
4.3. ATS5 Command Line Editing
ATS5 determines the character value used by the device to delete the immediately preceding character from the
AT command line (i.e. equates backspace key).
Syntax
Type
Command
Possible Return Result
Instruction
Read Command ATS5? <n>
OK
-
Write Command
ATS5=<n> OK -
Parameter Description

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English