Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 68 of 200 2018-07-02
<command>
Command passed on by the MT to the SIM; refer GSM 51.011 [28]
176
READ BINARY
178
READ RECORD
192
GET RESPONSE
214
UPDATE BINARY
220
UPDATE RECORD
242
STATUS
203
RETRIEVE DATA
219
SET DATA
<fileid> Integer type This is the identifier of a elementary datafile on SIM. Mandatory for every command
except STATUS
<p1>/<p2>/<p3
>
Integer type
Parameters passed on by the MT to the SIM. These parameters are mandatory for
every command, except GET RESPONSE and STATUS. The values are described in
GSM 51.011 [28]
<data> String type Information which shall be written to the SIM (hexadecimal character format; refer
+CSCS)
<pathid> String type
Contains the path of an elementary file on the SIM/UICC in hexadecimal format as
defined in ETSI TS 102 221 [60] (e.g. “7F205F70” in SIM and UICC case). The
<pathid> shall only be used in the mode “select by path from MF” as defined in ETSI
TS 102 221 [60].
9.8. AT+CLAC Available AT Commands
Execution command causes the MT to return one or more lines of AT Commands.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+ CLAC =? OK -

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English