Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 45 of 200 2018-07-02
<codings>s)
OK
Read Command AT+CHSN? +CHSN: <wAiur>,<wRx>,<topRx>,<codings>
OK
-
Write Command
AT+CHSN=[<wAiu
r>[,<wRx>[,<topRx
>[,<codings>]]]]
OK -
Parameter Description
parameter
Value
Instruction
<wAiur>
0 TA shall calculate a proper value from currently selected
fixed network user rate(<speed> Sub parameter from +CBST
command)
2 14400(bps)
4 28800(bps)
7 57600(bps)
<wRx>
0
TA shall calculate a proper value from currently
selected<wAiur> and <codings>
<topRx>
0 TA shall calculate a proper value from currently
selected<wAiur> and <codings>
<codings>
0 All supported codings are accepted
6.10. AT+CGPIAF IPV6 Format
Reads IP Address Format, determines what format to print IPV6 address parameters of other AT commands,
and reports Mobile Termination Error Change result code to numeric value

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English