Telit Wireless Solutions LN940A11 SERIES - ATQCRPW Report the Received Radio Signal Power; ATQCSQ Return RSCP

80591ST10886A Rev.2 Page 145 of 200 2018-07-02
13.31. AT$QCSQ Return RSCP
AT$QCSQ is used to return RSCP, ECIO, SIR, PATHLOSS, and RSSI if present.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCSQ=? AT$QCSQ=?
$QCSQ: (-121 - -25),(-31 – 0),(-10 –
20),(46 – 148),(-121 - -25)
OK
Exec Command AT$QCSQ
$QCSQ:
<rscp>,<ecio>,<sir>,<pathloss>,<rs
si>
OK
Parameter Description
parameter
Value
Instruction
<rscp> -121 - -25
<ecio> -31 – 0
<sir> -10 – 20
<pathloss> 46 – 14
<rssi> -121 - -25
13.32. AT$QCRPW Report the Received Radio Signal Power
AT$QCRPW is used to report the received radio signal power in a scale of 0 to 75.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCRPW=? $QCRPW: (0-75)
OK