Telit Wireless Solutions LN940A11 SERIES - 15.32. ATBANDPRI Set Band Attach Priority

80591ST10886A Rev.2 Page 194 of 200 2018-07-02
AT^CA_INFO?
PCC info: Band is LTE_B1, Band_width is 10.0 MHz
SCC1 info: Band is LTE_B8, Band_width is 10.0 MHz
OK
AT^CA_INFO?
PCC info: Band is LTE_B2, Band_width is 10.0 MHz
SCC1 info: Band is LTE_B4, Band_width is 10.0 MHz
SCC2 info: Band is LTE_B5, Band_width is 10.0 MHz
OK
2CA
3CA
15.32. AT^BAND_PRI Set Band Attach Priority
AT^BAND_PRI is used to set LTE band attach priority.
Syntax
Type
Command
Possible Return Result
Instruction
Write Command AT^BAND_PRI=<band> OK
Read Command AT^BAND_PRI? ^BAND_PRI: <band>
Parameter Description
parameter
Value
Instruction
<band> (1,2,3,4,5,7,8,12,13,17,18,19
,20,21,25,26,28,29,30,38,39,
40,41,66)
Example
AT^BAND_PRI=1,2,3
OK