Telit Wireless Solutions LN940A11 SERIES - Network Service-Related Commands; AT+CNUM Subscriber Number; AT+CREG Network Registration Report

80591ST10886A Rev.2 Page 55 of 200 2018-07-02
8. NETWORK SERVICE-RELATED COMMANDS
8.1. AT+CNUM Subscriber Number
Action command returns the MSISDNs related to the subscriber (this information can be stored in the SIM/UICC
or in the MT). When storing information in the SIM/UICC, if a SIM card is present or if a UICC with an active
GSM application is present, the information is stored in the EFMSISDN under DFTelecom. If a UICC with an
active USIM application is present, the information is stored in the EFMSISDN under ADFUSIM). If subscriber
has different MSISDN for different services, each MSISDN is returned in a separate line.
Syntax
Type
Command
Possible Return Result
Instruction
Execute
Command
AT+CNUM <n>
OK
-
Test Command AT+CNUM=? OK -
Example
AT+CNUM
+CNUM:“test”,”13012345678”,129
OK
Before you first execute this command, you should execute
these settings:
AT$QCPBMPREF=1
AT+CPBS=”ON”
AT+CPBW=1,”13012345678”,,”test”
8.2. AT+CREG Network Registration Report
Set command controls the presentation of an unsolicited result.
Read command returns the status of result code presentation and an integer <stat> which shows whether the
network has currently indicated the registration of the MT.
Syntax