Telit Wireless Solutions LN940A11 SERIES - AT+CIMI Request International Mobile Subscriber Identity

80591ST10886A Rev.2 Page 36 of 200 2018-07-02
UCS2
16-bit universal multiple-octet coded character set (ISO/IEC10646 [32]). UCS2
character strings are converted to hexadecimal numbers in the range 0000 to FFFF;
e.g. “004100620063” equates three 16-bit characters with decimal values 65, 98 and
99.
5.6. AT+CIMI Request International Mobile Subscriber Identity
AT+CIMI delivers the International Mobile Subscriber Identity (IMSI). The IMSI permits the TE to identify the
individual SIM attached to the UE.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CIMI=? OK -
Exec Command AT+CIMI XXX
OK
Display IMSI.
If failed. It maybe that SIM card is not
initiated or locked. If locked, need to
input PIN code or PUK code.