Telit Wireless Solutions LN940A11 SERIES - Vendor Extended AT Commands; AT+RESET Reset the Target

80591ST10886A Rev.2 Page 158 of 200 2018-07-02
<hd_auto>,<crc_type>,
<nrzi_en>, <sync1>,
<sync2>
Parameter Description
parameter
Value
Instruction
<trans_idle> 0
<framed_idle> Undefined
<framed_un_ov> Undefined
<hd_auto> Undefined
<crc_type> 0
<nrzi_en> 0
<sync1> 0 to 255
<sync2> Undefined
15. VENDOR EXTENDED AT COMMANDS
15.1. AT+RESET Reset the Target
AT+ RESET command is used to reset the target.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT+RESET OK
Parameter Description
parameter
Value
Instruction
NULL
Example
AT+RESET Reset the target