Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 104 of 200 2018-07-02
Read Command AT+CSCA? +CSCA:<sca>,<tosca>
OK
Write Command
AT+CSCA=<sca>[,<tosca
>]
OK
Parameter Description
parameter
Value
Instruction
<sca> - Service Center Address, value field in string format, BCD
numbers (or GSM 7 bit default alphabet characters) are
converted to characters of the currently selected TE
character set (refer to command AT+CSCS), type of address
given by <tosca>
<tosca> -
SC address Type-of-Address octet in integer format, when
first character of <sca> is + (IRA 43) default is 145, otherwise
default is 129.
Example
AT+CSCA=”+8613010888500”,145
OK
AT+CSCA?
+CSCA: “+8613010888500”,145
OK
Set the Service Center Address is 8613010888500 and SC
address Type-of-Address is 145
CMCC : ShenZhen City 8613800755500
CUCC : ShenZhen City 8613010888500
12.5. AT+CSMP Set Text Mode Parameters
The command is used to select values for additional parameters needed when SM is sent to the network or
placed in storage when text format message mode is selected.
Syntax

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English