Telit Wireless Solutions LN940A11 SERIES - ATGETIMEI Get the IMEI Value

80591ST10886A Rev.2 Page 162 of 200 2018-07-02
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT+SKUID HW Revision: <HW vision>
SW Revision: <SW vision>
OK
Parameter Description
parameter
Value
Instruction
<HW vision> - Current HW vision
<SW vision> - Current SW vision
Example
AT+SKUID
HW Revision: V000
SW Revision: T77W676.F0.0.0.0.1.GC.001
OK
Current HW vision
Current SW vision
15.6. AT^GETIMEI Get the IMEI Value
AT^GETIMEI command is used to get the IMEI value
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT^GETIMEI <IMEI>
OK
Success
+CME ERROR: memory failure Get IMEI failure
Parameter Description
parameter
Value
Instruction