Telit Wireless Solutions LN940A11 SERIES - AT+COPN Read Operator Names; AT+CPWD Set New Password

80591ST10886A Rev.2 Page 60 of 200 2018-07-02
64 dedicated packet access
128 dedicated PAD access
Example
AT+CLCK=”SC”,1,”1234”
OK
8.5. AT+CPWD Set New Password
Action command sets a new password for the facility lock function defined by command Facility Lock +CLCK
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CPWD=? +CPWD:
(“AB”,4),(“AC”,4),(“AG”,4),(“AI”,4),(“AO”,4),(“I
R”,4),(“OI”,4),(“OX”,4),(“SC”,8),(“P2”,8)
OK
-
Write Command
AT+ CPWD
=<fac>,<oldpwd>,<newpwd>
OK -
Parameter Description
parameter
Value
Instruction
<fac> “SC”
RUIM (PIN request)
“P2”
RUIM PIN2
<oldpwd> string type
Shall be the same as password specified for the facility from the MT user interface or
with command Change Password +CPWD.
<newpwd> string type The new password
8.6. AT+COPN Read Operator Names