Telit Wireless Solutions LN940A11 SERIES - ATQCPDPCFGE Set PDN Teardown Time Interval

80591ST10886A Rev.2 Page 129 of 200 2018-07-02
Syntax
Type
Command
Possible Return Result
Instruction
Read Command AT$QCSYSMODE? <mode>
OK
Parameter Description
parameter
Value
Instruction
<mode> LTE/HSUPA/ HSDPA
Provides details about the support of LTE/HSUPA/ HSDPA;
only the Read command is valid; 3GPP2 support added for
MPSS NI 3.0 and later
13.14. AT$QCPDPCFGE Set PDN Teardown Time Interval
AT$QCPDPCFGE is used to set PDN teardown time interval.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCPDPCFGE=? $QCPDPCFGE: (1-24),(0-1),(0-
122820),(0-16),(1-15,255),(0-
1023),(0-3600),(0-1023),(0-
1),(65280-65535),(0-999),(0-999)
OK
Read Command AT$QCPDPCFGE? $QCPDPCFGE:
1,0,0,0,255,20,300,0,0,0,0,0
OK
Write Command AT $QCPDPCFGE
=<profile_id>, < APN
disable flag>,
<timer_value>,
< APN class>,
<APN bearer >,
OK