Telit Wireless Solutions LN940A11 SERIES - AT+CPMS Preferred SMS Message Storage

80591ST10886A Rev.2 Page 101 of 200 2018-07-02
1 Broadcast type messages support, Type supported.
Example
AT+CSMS=0
+CSMS: 1,1,1
OK
AT+CSMS?
+CSMS: 0,1,1,1
OK
AT+CSMS=?
+CSMS: (0-1)
OK
Set the syntax of SMS AT commands is compatible with 3GPP
TS 27.005 Phase 2 version 4.7.0
12.2. AT+CPMS Preferred SMS Message Storage
The write command selects memory storages <mem1>,<mem2>, <mem3> to be used for reading, writing,
etc.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CPMS=? +CPMS:
(list of supported <mem1>s),
(list of supported <mem2>s),
(list of supported <mem3>s)
OK
-
Read command AT+CPMS? +CPMS:
<mem1>,<used1>,<total1>,
-