Telit Wireless Solutions LN940A11 SERIES - 13.28. ATCARDMODE Return Card Mode; 13.29. ATSYSCONFIG Set System Configuration

80591ST10886A Rev.2 Page 142 of 200 2018-07-02
parameter
Value
Instruction
<dsci_val > 0,1
13.28. AT^CARDMODE Return Card Mode
AT^CARDMODE is used to return the mode of the card amongst SIM or USIM.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT^CARDMODE OK
Parameter Description
parameter
Value
Instruction
NULL
13.29. AT^SYSCONFIG Set System Configuration
AT^SYSCONFIG is used to set system configuration.
Syntax
Type
Command
Possible Return Result
Instruction
Read Command AT^SYSCONFIG? ^SYSCONFIG:<mode>,<acqorder>,
<roam>,<srvdomain>
Write Command AT^SYSCONFIG=<mode
>,<acqorder>,<roam>,<sr
vdomain>
OK
Parameter Description