Telit Wireless Solutions LN940A11 SERIES - ATQCPRFCRT Create or Delete any 3 GPP2 EPC Profile

80591ST10886A Rev.2 Page 154 of 200 2018-07-02
disable flag value>,<roaming
disable timer value> )
OK
Read Command AT$QCPDPCFGEXT?
$QCRCIND:<cid>,<mbim_context>,
<roaming disable flag
value>,<roaming disable timer
value>
OK
Write Command AT$QCPDPCFGEXT
=<cid>,<mbim_context>,<
roaming disable flag
value>,<roaming disable
timer value>
OK
Parameter Description
parameter
Value
Instruction
<cid> 1-24
<mbim_context> 4
<roaming disable flag
value>
0-1
<roaming disable timer
value>
0-255
13.46. AT$QCPRFCRT Create or Delete Any 3GPP2/EPC Profile
AT$QCPDPCFGEXT is used to used to create or delete any 3GPP2/EPC profile. This command uses
tag:<value> syntax for all the parameters which allows users to specify these parameters in any order.
OPRT, PERSIST, TECH, PID, APNNAME and PDPTYPE are tags defined for parameters in this command.
Syntax
Type
Command
Possible Return Result
Instruction