Telit Wireless Solutions LN940A11 SERIES - ATQCPWRDN Power-down the UE

80591ST10886A Rev.2 Page 125 of 200 2018-07-02
13.7. AT$QCPWRDN Power-down the UE
AT$QCPWRDN command is used to power-down the UE.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCPWRDN=? OK
Exec Command AT$QCPWRDN OK
Parameter Description
parameter
Value
Instruction
Null
13.8. AT$QCDGEN Generate Data
AT$QCDGEN is used to generate data over +CGACT activated PDP context.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCDGEN=? OK
Write Command
AT$QCDGEN=<cid>,<dat
a length>
OK
Parameter Description
parameter
Value
Instruction
<cid> 1-24
Parameter specifies a particular PDP context definition. This
is also used in other PDP context-related commands
<data length> greater than 21
Example