80591ST10886A Rev.2 Page 113 of 200 2018-07-02
The command is used to send message with location value <index> from preferred message storage <mem2>
to the network (SMS-SUBMIT or SMS-COMMAND).
Syntax
Test Command AT+CMSS=? OK
Write Command
AT+CMSS=<index>[,<da
>[,<toda>]]
If text mode and sending
successful;
+CMSS: <mr>
If PDU mode and sending
successful;
+CMSS: <mr>
Parameter Description
<index> - In the message storage <memw>, the location value of the
message to send.
<da> Destination-Address, Address-Value field in string format;
BCD numbers (or GSM 7 bit default alphabet characters) are
converted to characters of the currently selected TE
character set, type of address given by <toda>.
<toda> - TP-Destination-Address, Type-of-Address octet in integer
format. (when first character of <da> is + (IRA 43) default is
145, otherwise default is 129). The range of value is from
128 to 255.
12.12.
AT+CMGW Write Message to Memory
The command is used to store message (either SMS-DELIVER or SMS-SUBMIT) to memory storage
<mem2>.
Syntax
To Next Page
Loading...
Need help?
General
