Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 32 of 200 2018-07-02
Parameter Description
parameter
Value
Instruction
<value> 1-[14]-255
14 is default value. Number of tenths of seconds to wait
before disconnecting after UE has indicated the absence of
received line signal
4.24. ATS30 Disconnect Inactivity Timer
Setting of an inactive timer value for disconnection when no user data is exchanged during a data call.
Syntax
Type
Command
Possible Return Result
Instruction
Read Command ATS30? <value>
OK
-
Write Command ATS30=[value] OK -
Parameter Description
parameter
Value
Instruction
<value> [0]-1-255 0 is default value. Number of disconnect inactivity time.
4.25. AT\V Single Line Connect Message
Enables/disables the display of extended result code in response to a data call.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT\V? OK -

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English