Telit Wireless Solutions LN940A11 SERIES - 13.27. ATDSCI Control Call Event

80591ST10886A Rev.2 Page 141 of 200 2018-07-02
Type
Command
Possible Return Result
Instruction
Test Command AT$QCDRX=? $QCDRX: (0,6-9)
OK
Read Command AT$QCDRX? $QCDRX: <drx coefficient>
OK
Write Command AT$QCDRX=
<drx coefficient>
OK
Parameter Description
parameter
Value
Instruction
<drx coefficient> 6 CN = 6, T = 32
7 CN = 7, T = 64
8 CN = 8, T = 128
9 CN = 9, T = 256
13.27. AT^DSCI Control Call Event
AT^DSCI is used to enables/disables ^DSCI URC(call event).
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT^DSCI =? ^DSCI: (0-1)
OK
Read Command AT^DSCI? ^DSCI: <dsci_val>
OK
Write Command AT^DSCI=<dsci_val > OK
Parameter Description