Telit Wireless Solutions LN940A11 SERIES - AT+GPSCN Get the GPS SNR; AT+SKUID Get HW and SW Version Info

80591ST10886A Rev.2 Page 161 of 200 2018-07-02
STATUS: SRV/REGISTERED
SUB STATUS: NORMAL_SERVICE
RRC Status: CONNECTED
SVC: CS_PS
Tx Pwr: -28.0dB
TMSI: 80183197200
IP: 10.157.141.124
AVG RSRP: -63.6dBm
OK
15.4. AT+GPSCN Get the GPS SNR
AT+GPSCN command is used to get the GPS SNR
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT+GPSCN +GPSCN:<snr>
OK
Parameter Description
parameter
Value
Instruction
<snr> - The SNR of first searched satellite
Example
AT+GPSCN
+GPSCN:0.000000
OK
15.5. AT+SKUID Get HW and SW Version Info
AT+SKUID command is used to get HW and SW version info