Telit Wireless Solutions LN940A11 SERIES - 15.23. ATCAENABLE EnableDisable CA

80591ST10886A Rev.2 Page 182 of 200 2018-07-02
AT+BUILDTIME is used to check the AP and MP build time
Syntax
Type
Command
Possible Return Result
Instruction
Read Command AT+BUILDTIME？ <build time>
OK
Parameter Description
parameter
Value
Instruction
<build time> module build time
Example
AT+BUILDTIME?
MP: Jan 12 2017, 05:23:36
AP: Jan 12 2017, 06:06:34
OK
15.23. AT^CA_ENABLE Enable/Disable CA
AT^CA_ENABLE is used to enable/disable CA function.
Syntax
Type
Command
Possible Return Result
Instruction
Read Command AT^CA_ENABLE? CA_FLAG: DISABLE
OK
Write Command
AT^CA_ENABLE
=<mode>
You have succeeded to
ENABLE/DISABLE the CA function!
OK
Test Command AT^CA_ENABLE=? 0:Enable
1-255:Disable
OK