Telit Wireless Solutions LN940A11 SERIES - ATQCPDPLT Control Delays; ATQCSYSMODE Current System Mode

80591ST10886A Rev.2 Page 128 of 200 2018-07-02
Read Command AT$QCPINSTAT? $QCPINSTAT:
READY,READY,READY,READY,R
EADY,READY,SIM PIN2
OK
Parameter Description
parameter
Value
Instruction
Null
13.12. AT$QCPDPLT Control Delays
AT$QCPDPLT is used to enable/disable tolerance for long delays is PDP call setup..
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCPDPLT=? $QCPDPLT: (0-1)
OK
Read Command AT$QCPDPLT? $QCPDPLT: <n>
OK
Write Command AT$QCPDPLT=<n> OK
Parameter Description
parameter
Value
Instruction
<n> 0 Disables waiting
1 Enables waiting
13.13. AT$QCSYSMODE Current System Mode
AT$QCSYSMODE is used to return current system mode of ME.