Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 38 of 200 2018-07-02
Test Command AT+CSTA=? +CSTA: (<type> value list)
OK
-
Read Command AT+CSTA? +CSTA: <type>
OK
-
Write Command AT+CSTA=<type> OK -
Exec Command AT+CSTA OK -
Parameter Description
parameter
Value
Instruction
<type> 145
when dialing string includes international access code
character “+”
[129] Otherwise.Default value.
6.3. AT+CMOD Set Call Mode
This set command selects the type of call mode. Test command returns values supported a compound value.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CMOD=? +CMOD: (<mode> value list)
OK
-
Read Command AT+CMOD? +CMOD: <mode>
OK
-
Write Command AT+CMOD=[<mode>] OK -
Exec Command AT+CMOD OK -
Parameter Description
parameter
Value
Instruction

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English