Telit Wireless Solutions LN940A11 SERIES - AT+CSCB Select Cell Broadcast Message Indication

80591ST10886A Rev.2 Page 107 of 200 2018-07-02
OK
at+cmgr=0
+CMGR: “STO
UNSENT”,”18576408172”,,129,17,0,0,167,”+8613800755500”,145,10
rose hello
at+csdh=0
OK
at+cmgr=0
+CMGR: “STO UNSENT”,”18576408172”,
rose hello
Read the index 0 message
Set Text Mode Parameters
12.7. AT+CSCB Select Cell Broadcast Message Indication
The test command returns the supported <operation>s as a compound value.
The read command displays the accepted message types.
Depending on the <operation> parameter, the write command adds or deletes the message types accepted.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command
AT+CSCB=? +CSCB: (list of supported <mode>s)
OK
Read Command
AT+CSCB? +CSCB:<mode>,<mids>,<dcss>
OK
Write Command AT+CSCB=[<mode>[,<mi
ds>[,<dcss>]]]
OK
Parameter Description
parameter
Value
Instruction