Telit Wireless Solutions LN940A11 SERIES - SMS Text and PDU Mode Commands; AT+CSMS Select Message Service

80591ST10886A Rev.2 Page 100 of 200 2018-07-02
12. SMS TEXT AND PDU MODE COMMANDS
12.1. AT+CSMS Select Message Service
This set command selects messaging service <service>. It returns the types of messages supported by the ME
Read command reports current service setting along with supported message.
Test command reports the supported value of the parameter <service>.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CSMS=? +CSMS: (<service> list)
OK
0,1
Read command AT+CSMS?
+CSMS:<service>,<mt>,<mo>,<bm
>
OK
-
Write Command AT+CSMS=<service> +CSMS:<mt>,<mo>,<bm>
OK
TA return ME support service
type
Parameter Description
parameter
Value
Instruction
<service> 0 The syntax of SMS AT commands is compatible with 3GPP
TS 27.005 Phase 2 version 4.7.0
1
The syntax of SMS AT commands is compatible with 3GPP
TS 27.005 Phase 2+ version.
<mt> 0 Mobile terminated messages support, Type not supported
1 Mobile terminated messages support, Type supported
<mo> 0 Mobile originated messages support, Type not supported
1 Mobile originated messages support, Type supported
<bm> 0
Broadcast type messages support, Type not supported.
Default: 0.