80591ST10886A Rev.2 Page 49 of 200 2018-07-02
Example:
at+csdf =7,2
OK
at+cclk?
+cclk: “1980/01/06,01:11:47”
OK
6.13.
AT+CUAD UICC Application Discovery
This command asks the MT to discover what applications are available for selection on the UICC. According to
TS 102.221 [60], the ME shall access and read the EF
DIR
file in the UICC and return the values that are stored
in its records. Each record contains the AID and optionally application parameters of one of the applications
available on the UICC.
Syntax
Exec Command AT+CUAD +CUAD: <response>
OK
-
Parameter Description
<response>
XXX String type in hexadecimal character format.
Example:
AT+CUAD
+CUAD: “611D4F10A0000000871002FF86FFFF89FFFFFFFF5009556E6976657253494DFF”
To Next Page
Loading...
Need help?
General
