Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 48 of 200 2018-07-02
the parameter is omitted (“+CSDF =”,”+CSDF =<mode>”,”+CSDF=,<auxmode>”),then this sets the default
value.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CSDF=? +CSDF: (<mode>
list),(<auxmode> list)
OK
-
Read Command AT+CSDF? +CSDF: <mode>,<auxmode>
OK
-
Write Command
AT+CSDF=[[<mode>]
[,<auxmode>]]
OK -
Parameter Description
parameter
Value
Instruction
<mode>
1 NOTE: It is manufacturer specific which modes that are
supported. Presentation of MMM is language dependent.
DD-MMM-YYYY
2 DD-MM-YY
3 MM/DD/YY
4 DD/MM/YY
5 DD.MM.YY
6 YYMMDD
7 YY-MM-DD
<auxmode>
1 yy/MM/dd
2 yyyy/MM/dd

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English