Telit Wireless Solutions LN940A11 SERIES - AT+CMGS Send Message

80591ST10886A Rev.2 Page 111 of 200 2018-07-02
<scts>][,<tooa/toda>,<length>]<cr>
<lf><data>[<cr><lf>
+CMGL:
<index>,<stat>,<da/oa>,[<alpha>],[
<scts>][,<tooa/toda>,<length>]<cr>
<lf><data>[…]]
If PDU mode, command successful;
+CMGL:
<index>,<stat>,[<alpha>],<length>
<cr><lf><pdu>[<cr><lf>
+CMGL:<index>,<stat>,[<alpha>],<l
ength><cr><lf><pdu>[…]]
Parameter Description
parameter
Value
Instruction
<stat>
Text Mode
“REC UNREAD” Received unread message (i.e. new message)
“REC READ” Received read message
“STO UNSENT” Stored unsent message
“STO SENT” Stored sent message
“ALL” All messages
<stat>
PDU Mode
0 Received unread message (i.e. new message)
1 Received read message
2 Stored unsent message
3 Stored sent message
4 All messages
12.10. AT+CMGS Send Message
The command is used to send message from a TE to the network (SMS-SUBMIT).
Syntax