Telit Wireless Solutions LN940A11 SERIES - 13.17. AT*CNTI Controls the Listing of the Technologies UE; ATQCDEFPROF Set Profile Number

80591ST10886A Rev.2 Page 133 of 200 2018-07-02
13.17. AT*CNTI Controls the Listing of the Technologies UE
AT*CNTI is used to Controls the listing of the technologies UE is capable of <n>: 0,1,2
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT*CNTI =? *CNTI: (0-2)
OK
Read Command AT*CNTI? *CNTI: <n>,<tech>
OK
Write Command AT*CNTI=<n> OK
Parameter Description
parameter
Value
Instruction
<n> 0 Technology currently in use to access the network
1 The available technologies on the current network.
2 All technologies supported by the device.
<tech> GSM/GPRS/EDGE/UMTS/H
SDPA/HSUPA
13.18. AT$QCDEFPROF Set Profile Number
AT$QCDEFPROF is used to set the default profile number for specific subscription and family.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCDEFPROF=? $QCDEFPROF: (0-1),(1-2),(1-16)
OK
Read Command AT$QCDEFPROF? $QCDEFPROF: 0,1,1
$QCDEFPROF: 1,1,1
OK