Telit Wireless Solutions LN940A11 SERIES User Manual

80591ST10886A Rev.2 Page 46 of 200 2018-07-02
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+ CGPIAF =? + CGPIAF: (list of supported < Ipv6_AddressFormat >s),
(list of supported < Ipv6_SubnetNotation >s),(list of
supported < Ipv6_LeadingZeros >,(list of supported
< Ipv6_CompressZeros >s)
OK
-
Read Command AT+ CGPIAF?
+ CGPIAF:
<Ipv6_AddressFormat>,<Ipv6_SubnetNotation> ,<Ipv6_Lea
dingZeros>,<Ipv6_CompressZeros>
OK
-
Write Command AT+ CGPIAF =
[<Ipv6_AddressFor
mat>[,<Ipv6_Subn
etNotation>[,<Ipv6
_LeadingZeros>[,<
Ipv6_CompressZer
os>]]]]
OK -
Parameter Description
parameter
Value
Instruction
< Ipv6_AddressFormat >
0 Disable
1 Enable
< Ipv6_SubnetNotation >
0 Disable
1 Enable
< Ipv6_LeadingZeros >
0 Disable
1 Enable
< Ipv6_CompressZeros >
0 Disable
1 Enable

Telit Wireless Solutions LN940A11 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A11 SERIES
Category	Control Unit
Language	English