Texas Instruments TMS320C6455 User Manual

CLKIN1
CLKIN2
POR
RESET
(A)(B)
RESETSTAT
Boot and
Device Configuration Pins
(C)
9
7
6
8
TMS320C6455
www.ti.com SPRS276M –MAY 2005–REVISED MARCH 2012
A. RESET should only be used after device has been powered up. For more details on the use of the RESET pin, see
Section 7.6, Reset Controller.
B. A reset signal is generated internally during a Warm Reset. This internal reset signal has the same effect as the
RESET pin during a Warm Reset.
C. Boot and Device Configurations Inputs (during reset) include: AEA[19:0], ABA[1:0], and PCI_EN.
Figure 7-9. Warm Reset and Max Reset Timing
Copyright © 2005–2012, Texas Instruments Incorporated C64x+ Peripheral Information and Electrical Specifications 131
Submit Documentation Feedback
Product Folder Link(s): TMS320C6455

Texas Instruments TMS320C6455 Specifications

General

Brand	Texas Instruments
Model	TMS320C6455
Category	Signal Processors
Language	English