USTER
®
HVI SPECTRUM
Instruction Manual
3.8 Generating a Graph
1. First, select the REPORTS button from the
HVI
SPECTRUM
MAIN
MENU.
2. The REPORTS MENU screen will appear. Select GRAPHS from the
menu options.
3. To generate a graph, select the RUN item. The RUN A GRAPH
screen will appear:
Figure 8-11: Run a Graph
4. Enter the name of the graph that you want to run by typing the
name (it must be entered exactly as it appears on the list) or by
selecting it from the pull-down list in the Select a Graph field.
5. Enter the Lot Number under Select a Lot ID.
6. Once you have selected the information to be generated, select the
OK button.
7. The graph will display on the screen.
8. Print the graph, if desired, by selecting the PRINT option on the
R
EPORTS screen toolbar or by choosing FILE, PRINT.
Uster Technologies, Inc. Chapter 8
Reports • Page 8-16
To Next Page
Loading...
