USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 8
Reports • Page 8-11
3.3 Modifying/Deleting a Report
Once a report has been created, it can be modified or deleted as
needed.
• Select the name of the report from the drop down list on the R
EPORT
DESIGN screen.
(Refer to Figure 8-6)
• To modify a report, select and remove the report properties by
using the same steps that are outlined in the Design Report section.
The settings at the bottom of the screen can also be modified to
reflect changing needs. Once the report has been modified, save
the changes by selecting the OK button.
• To delete a report, select the name from the drop down list and
press the DELETE button. Select OK when the confirmation box
appears to delete the report.
To Next Page
Loading...
