USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 13
Maintenance • Page 13-1
Chapter 13 Maintenance
1 Introduction
The
HVI SPECTRUM
system has been designed to reduce maintenance
to a minimum. To keep the instruments in top condition, a few tasks
must be performed routinely.
2 Cleaning the System
Maintenance can be divided into three categories:
As required
After each shift
Daily
2.1 As Required
Excess cotton should be removed from the carding plate as
needed.
2.2 After Each Shift
After each shift, the excess fiber that has gathered in the instrument
during the measurement procedures should be removed using a
vacuum cleaner.
After cleaning, close all doors and covers to their original
positions.
To Next Page
Loading...
