USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 1
Overview • Page 1-10
8.1.1 Keyboard Commands
Pressing the ENTER key on the keyboard registers an entry into the
computer. An entry can be erased any time before pressing this key
and corrected by using the BACKSPACE key.
If the keyboard does not respond to input or if the system halts in mid-
operation, reset the system. If there is still no response, turn OFF the
main power switch that is accessed by opening the door to the control
cabinet.
8.2 Exit
Occasionally, you may wish to escape an operation without completing
the sequence in a selected screen/dialog box. Generally, escaping can
be accomplished by selecting the CANCEL button or the QUIT button.
To Next Page
Loading...
