EasyManua.ls Logo

USTER HVI SPECTRUM - Recommended Lot Limits for Cotton; Table 14-1: Recommended Lot Limit Values

USTER HVI SPECTRUM
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 14
Appendix • Page 14-7
2.6 Recommended Lot Limits for Cotton
Uster Technologies, Inc. recommends that the following values be used
for cotton lot limits:
MICRONAIRE LOWER LIMIT
3.2
MICRONAIRE UPPER LIMIT
5.9
Inches Millimeters
LENGTH LOWER LIMIT 0.93 22.9
LENGTH UPPER LIMIT 1.35 34.3
Index
UNIFORMITY LOWER LIMIT 77
UNIFORMITY UPPER LIMIT 90
HVI SPECTRUM
STRENGTH LOWER LIMIT 24
STRENGTH UPPER LIMIT 45
Table 14–1: Recommended Lot Limit Values
Upper and lower limits for other properties should be set to 0
(zero).
Operators may set their own values for lot limits by selecting S
ETUP
from the
HVI
SPECTRUM
MAIN MENU, and then LOT LIMITS from the
screen.
If test results are to be transmitted to an external computer, the
above limits should also be set in the R
EPORTS screens.
(See
Chapter 8 Reports.)

Table of Contents

Related product manuals