USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 14
Appendix • Page 14-4
2.3 Monitor Information
• No user-serviceable parts are included inside the monitor's
cabinet. Please DO NOT attempt to remove the back of the
cabinet. You will be exposed to a shock hazard!
CAUTION!
Prior to connecting or disconnecting any display
peripheral, be sure that the AC power to the instrument
is turned “OFF”. Failure to do so may cause serious
personal injury, as well as permanent damage to your
computing equipment.
• In order to prevent overheating, ensure that the ventilation
openings in the monitor are not covered. The monitor should not
be placed near a source of heat.
• DO NOT place objects on top of the monitor cabinet that could
fall into vents or that could cover the vents and prevent proper
cooling of the monitor's electronics.
• DO NOT place the monitor where sunlight or bright room light will
fall directly on the screen.
• When necessary, clean the cabinet with a damp cloth. Use only
mild detergents. DO NOT use alcohol or ammonia based
products.
2.4 Printer Information
The
HVI SPECTRUM
must be operated using the Hewlett Packard DeskJet
Printer. For instructions on using this printer, please refer to “
The HP
DeskJet Printer User’s Guide
” that is provided with your
HVI SPECTRUM
.
It is important to note that the
HVI
SPECTRUM
has been configured to
work in cooperation with this specific printer. It is strongly suggested
that should this printer fail, it be replaced with the same model. If this is
not possible, consult a certified Uster Technologies’ service technician
who will have to reconfigure your unit before it will operate correctly
with any other printer.
To Next Page
Loading...
