USTER HVI SPECTRUM - Service

USTER
®
HVI SPECTRUM Instruction Manual
Uster Technologies, Inc. Chapter 13
Maintenance • Page 13-4
4. Thoroughly rinse the tile with warm water taking care to remove all
soap and residue.
5. Thoroughly dry both sides of the tile with a soft cotton cloth.
6. These tiles are very porous and should be allowed to dry for a period
of at least 24 hours before next use.
7. After the 24 hour drying period, it is recommended that they be buffed
again with a clean cotton cloth.
4 Service
ONLY a qualified Uster Technologies’ service technician should
perform service on the HVI SPECTRUM system. Factory service is
available at the home office and field service is available worldwide. If
service is necessary, contact Uster Technologies, Inc. for current service
rates.
We will gladly provide technical assistance by telephone, fax, or e-mail.
Please refer to the title page of this manual for the appropriate phone
number(s).