USTER HVI SPECTRUM - Chapter 11 USTER QualiProfile; Introduction and Profile Selection

USTER
®
HVI SPECTRUM Instruction Manual
Uster Technologies, Inc. Chapter 11
USTER® QualiProfile • Page 11-1
Chapter 11 USTER® QualiProfile
1 Introduction
The USTER® QualiProfile enables the operator to see if the cotton fiber
is within the predefined measurement tolerances and a comparison with
the USTER® Statistics can be completed. This feature is beneficial for
internal quality control.
Important attributes of the QualiProfile software are listed
below:
1. The test values of the cotton will be shown in a sun diagram.
2. The importance of a value is proportional to the width of the
representing segment.
3. The diagram can be scaled with the percentile values of the
Statistics, depending on the definition/selection of each individual
profile (Profile Setup).
4. A parameter and its representing segment can be subdivided in
sub values. The diagram is built in a hierarchic form (tree-type
form) QualityHVIColorRd.
5. Every test value is compared with the profile and is represented in
a color indicating if the test value is within
or outside the
selected minimum and maximum upper values of the profile.