USTER HVI SPECTRUM - Figure 6-5: Error Message - Lot Limit Name Already Exists; Figure 6-6: Lot Limits Screen - 0 Property

USTER
®
HVI SPECTRUM Instruction Manual
IMPORTANT: You cannot use an existing name when
adding a new lot limit; THE NAME MUST BE UNIQUE. If
you accidentally select an existing lot limit, an error
message will appear.
Figure 6-5: Error Message - Lot Limit Name Already Exists
9. If a property does not require a lot limit, enter 0 (zero) as both the
lower and upper limit. (Refer to the figure below)
Figure 6-6: Lot Limits Screen – 0 Property
Uster Technologies, Inc. Chapter 6
Configurations • Page 6-8