USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 10
Bale Manager • Page 10-28
4.6 Mix
A mix is defined as a group of bales or a laydown that is combined
in a mill to create a yarn.
The MIX menu is used to access the following screens:
• Make a Mix - is used to select a specified number of bales out of
the inventory to make a mix.
• Active Mixes - is used to view, edit, or delete a previously created,
but unaccepted mix.
• Preview/Accept Mix – this screen is used to preview and/or
accept active mixes.
Each of these screens is discussed below.
4.6.1 Make a Mix
This screen is used to choose the bales form the “working” inventory that
will be used to create the mix.
• Select the MIX menu from the BALE MANAGER MAIN MENU. Select
the MAKE item to access the MAKE A MIX screen.
Note:
The Mix Mode is determined by the System Configuration
screen and can be either “Proportional” or “Centered.”
To Next Page
Loading...
