USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 10
Bale Manager • Page 10-23
To Edit Existing Data:
1. Press the EDIT button.
2. Enter the Lot ID and Bale ID or select them from the pull down lists.
3. Position the cursor in the appropriate field for Mix Number, SCI,
Micronaire, etc and make the necessary correction(s).
4. Press the OK button to save the change(s) when you are finished.
To Add New Data:
1. Press the N
EW button.
2. Enter the Lot ID and Bale ID or select them from the pull down lists.
3. Enter the necessary data in the Mix Number, SCI, Micronaire,
and etc. fields.
4. Press the OK button to save the information when you are finished.
To Next Page
Loading...
