USTER HVI SPECTRUM - Page 175

USTER
®
HVI SPECTRUM Instruction Manual
Uster Technologies, Inc. Chapter 11
USTER® QualiProfile • Page 11-7
7. Enter the lower and upper value Limits for each property in the
corresponding fields. Make sure the limits represent actual
measurement ranges.
8. Select the percentile value of the USTER® Statistics that you want
to compare.
9. Enter the reference length in the field labeled USTER®
Statistics Reference Length. Choose the unit of
measurement from the drop-down box located beneath.
ATTENTION: Select the correct reference lengths for the
USTER® STATISTICS in order to make correct
comparisons. For example, it does not make sense to
compare a 1” staple length to a 1 3/16” (or 31.0 mm)
cotton length.
10. Click on the PRINT button to print your QualiProfile selection for
future reference.
11. Click OK to save QualiProfile.
12. Click NEW if you want to design another QualiProfile.
13. Select a name from the Profile Name drop-down box and hit
the DELETE button if you want to delete a profile.