C H A P T E R 8 – F R O N T P A N E L O P E R A T I O N
AT5600 User Manual 98-119 issue 14 Page 186
8.1.8. SET UP
Set up allows the adjustment of the AT5600 options that effect the way the unit
runs tests and stores results.
You may change the System parameter at any time. Tap the SET UP soft-key in
the top-level screen. Once the SET UP soft-key is tapped you will see a display
like the following:
SOUND changes the internal Beeper options
CLOCK changes the time and date of the internal Time Clock
SERVER setup the Server mode method and Ethernet IP.
NETWORK DHCP or Static IP, if using Ethernet
BACK return to the top-level screen
To Next Page
Loading...