C H A P T E R 7 – T E S T S A N D T E S T C O N D I T I O N S
AT5600 User Manual 98-119 issue 14 Page 89
7. Tests and Test Conditions
7.1. Available Tests
The following table summarizes the tests available for the AT5600 and indicates
where they might be used
To determine which test are available, connect the AT5600 to a PC via AUX port
or USB-B port, launch the AT Editor. Tests which are not available for use shall
be grayed-out in the Available Tests window.
If you have purchases an AT5600 Standard, you will find you only have 14 of the
tests installed. Please contact Voltech if you wish to purchase tests that are not
available. We can also issue a 30-day timed trial code free of charge to allow you
try tests before committing to purchase.
See section 14.9 Customize Tester for instruction to upgrade your AT5600 with
additional tests.
To Next Page
Loading...
Need help?
General
