C H A P T E R 8 – F R O N T P A N E L O P E R A T I O N
AT5600 User Manual 98-119 issue 14 Page 175
Serial Number
You may enter the Serial Number of the transformer, if applicable.
Tap the SERIAL NUMBER soft-key; you will see the following display:
Enter the serial number for the transformer under test then tap the ACCEPT soft-
key.
The BACKSPACE soft-key will clear the last character entered.
The “X” in the entry field will clear the whole text
Serial numbers can be alphanumeric, and the tester will auto increment the last
numeric digits after each run.
Remember to create enough leading zeros, if you are going to exceed the
number of digits – see examples below
100 101 102 103 etc.
ATY678 ATY679 ATY680 ATY681 etc.
RFR998 RFR999 RFR000 RFR001 etc.
RFR0998 RFR0999 RFR1000 RFR1001 etc.
To Next Page
Loading...
Need help?
General
