C H A P T E R 5 – G E T T I N G S T A R T E D
AT5600 User Manual 98-119 issue 14 Page 72
If there is no transformer is fitted, the results will have no meaning, but you
have now successfully installed the AT5600 and the AT editor software.
The results window will give you the options to:
1. Re-run the test program.
2. Print the test results.
3. Save the test results.
4. Close the window.
Closing the window will return you to the top-level menu.
5.4.4. Transferring the Program to the Server
The Voltech Server software is supplied with every AT5600. The use of the
Server software is required for handling and storage of test results and is
recommended for handling large numbers of different test programs.
Having created, saved and tested the program TUTORIAL using the Editor, you
are now able to run it again on your AT Series Tester, but this time using the
Server. The procedure for transferring the program to the Server archive will
depend on where you have installed the Editor and Server programs.
To Next Page
Loading...
Need help?
General
