C H A P T E R 5 – G E T T I N G S T A R T E D
AT5600 User Manual 98-119 issue 14 Page 77
5.5. USB Printer Setup
The AT5600 can be configured to automatically print the test results at the end of
each program run and the results.
Automatic printing is configured as part of the test program using the Editor
software.
The Epson TM-T88V printer must be set to USB Printer Class mode to work
properly with the AT5600.
Detailed Instructions for setting up the Epson TM-T88V printer for use with
AT5600 is described in the following step-by-step instruction.
1. Close the paper roll cover of the Epson printer
2. Turn on the printer while pressing the Feed button. The status shall print.
3. After the printing, has been completed, the Paper LED shall be flashing
indicating that it is in set-up mode.
To Next Page
Loading...
Need help?
General
