Voltech AT5600 - Page 79

C H A P T E R 5 – G E T T I N G S T A R T E D
AT5600 User Manual 98-119 issue 14 Page 79
6. Press the Feed button, for less than one second, eleven times. This will
access Mode 11. USB Interface Settings. Then press and hold the Feed
button for more than one second. The printer shall print the following;
7. Press the Feed button, for less than one second, one time. This will access
Mode 11.1. Class. Then press and hold the Feed button for more than one
second. The printer shall print the following;
8. Press the Feed button, for less than one second, two times. This will set the
printer to Printer Class. Then press and hold the Feed button for more than
one second. The printer shall print the following;